Georgia-Pacific | Professional

SmartStock Ultra® Cutlery Dispenser

INSTALLING THE DISPENSER - WALL MOUNT



STEP 1 - SELECT LOCATION

  1. Position dispenser in the selected area on the wall.
  2. Mark the desired top and each side as a guide for bracket placement and set the dispenser aside.
Step 1 - Select Location

STEP 2 - LINE UP AND MARK POSITION

Line up the bracket within outer markings as follows and mark position through screw holes.

  • 2" below the top mark
  • Centered between the side marks with 1"on either side
Step 2 - Line Up and Mark Position


STEP 3 - TAPE MOUNTING
  1. Remove the tape liner and apply tape to the wall side of the bracket.
  2. Line the bracket up to wall markings and fasten to the wall.
Step 3 - Tape Mounting

STEP 4 - SCREW MOUNTING
  1. Place the bracket in position and mark hole placement.
  2. Drill four holes and fasten to the wall.
Step 4 - Screw Mounting

STEP 5 - ATTACH DISPENSER TO BRACKET

Attach dispenser to bracket by slipping over corresponding openings until it is secured in place.

NOTE: To remove dispenser from wall mount, open empty dispenser door and press the release.

Step 4 - Attach Dispenser to Bracket

Dixie® SmartStock® dispensers are offered via a lease agreement through an authorized distributor.