Georgia-Pacific | Professional

• Step 1 - Select Location and Clean the Surface
• Step 2 - Option A: Tape Mounting
• Step 3 - Option B: Screw Mounting
• Step 4 - Attach Dispenser to Bracket
• Step 5 - Attach the Mounting Bracket
• Step 6 - Attach the Dispensers to the Carousel

STEP 1 - SELECT LOCATION AND CLEAN THE SURFACE

• Carefully select the counter space for mounting the dispenser. Once the bracket is installed, it cannot be easily removed.
• Clean selected countertop surface thoroughly before installing bracket.

STEP 2 - OPTION A: TAPE MOUNTING

1. Remove tape liner and apply tape to the bottom of the bracket.
2. Place bracket firmly on countertop in desired location.

STEP 3 - OPTION B: SCREW MOUNTING

1. Place the bracket down on counter and mark hole placement.
2. Drill four holes and fasten to the counter.

STEP 4 - ATTACH DISPENSER TO BRACKET

Grasping with both hands, place unit over bracket and secure in place.

NOTE:To remove dispenser from counter mount, press release located in the back of the base.

STEP 5 - ATTACH THE MOUNTING BRACKET

1. Align the metal mounting brackets (included in the dispenser packaging) to the bracket outlines on the top of the carousel and screw brackets into the carousel. Do not use the screws that came with the mounting brackets. Use the twelve (12) #8 x 1/2" PH Pan Head Screws that were included in the Carousel packaging. (package B)


2. Remove the wall mount brackets from the back of the SmartStock dispensers by opening the dispenser door and pressing out the release lever while pushing down on the wall mount bracket.

STEP 6 - ATTACH THE DISPENSERS TO THE CAROUSEL

1. Grasping the dispenser with both hands, place unit over bracket and secure in place. Attach all three dispensers to carousel.
   
   



2. Slide the triangular support tabs into the middle of the rectangular openings in the back of the mounted dispensers. Press the triangular Support piece firmly down to lock the tabs in place.
   
   
3. Place Smart Stock Dispenser stand on a level surface.