Georgia-Pacific | Professional

enMotion® Recessed Automated Towel Dispenser


Cabinet dimensions required: 10-5/8" x 15-1/4".

  1. Remove existing dispenser.
  2. Tap Hinge Pin to expose at bottom of hinge.
    Tap Hinge Pin
  3. Pull Hinge Pin straight down to remove.
    Pull Hinge Pin Down to Remove
  4. Install and fit enMotion Recessed Automated Touchless Towel Dispenser into cavity.
    Fit Dispenser into Cavity
  5. Locate mounting slots inside enMotion Recessed Automated Touchless Towel Dispenser.
  6. Secure with drywall screws through mounting slots into studs.
    Secure Dispenser with Drywall Screws

If the existing door is larger than 13.5" in width by 16.5" in length then a Custom Filler Panel will be required. Contact a GP Marketing Services representative for Filler Panel availability options. Call 1-877-377-2737 or e-mail us. Note: If installation requires a Custom Filler Panel, you will need to allow at least 14 working days for delivery.

enMotion® dispensers are offered via a lease agreement through an authorized distributor.