Georgia-Pacific | Professional

There are several different methods for installing enMotion® Recessed towel dispensers.

TOOLS AND SUPPLIES

The following tools are necessary to properly complete this installation:

• Cordless drill and Phillips head drill bit
• Hammer
• Vise grip pliers
• Masking tape
• Sheetrock saw
• Two drift pins: one 1/32" and one 1/16" diameter
• #10 pan head self-tapping screws

INSTALLATION INSTRUCTIONS FOR NEW AND RETROFIT CONSTRUCTION

When mounted directly into the wall, the unit is mounted using #10 self-tapping screws. Many possible methods can be used to mount the dispenser, given the wide variety of stud configurations behind the wall. The enMotion Recessed Automated Towel dispenser has mounting holes on both sides of the backplate and directly in the rear of the unit. The unit must be mounted flush to the wall, 4" recessed to comply with ADA guidelines. The door of this unit can easily be removed in the event the hinge needs to be on the opposite side.

• Installation of enMotion Recessed Automated Touchless Towel Dispenser into Sheetrock Wall


• "The Perfect Fit" Cabinet Installation


• Installation of enMotion Recessed Automated Touchless Towel Dispenser and Trash Receptacle into Wall


• ASI/Bobrick Roll Towel - Center Mount Installation

If you are unsure which method to use for your location, call 1-866-HELLO GP (435-5647) or contact us via e-mail.