Georgia-Pacific | Professional

enMotion® Automated Towel Dispenser

LOADING THE DISPENSER

To ensure proper operation of your enMotion® Automated Towel Dispenser, you must use the correct Georgia-Pacific enMotion roll towels as listed below:

89460 Georgia-Pacific enMotion® White High Capacity Roll Towel

89490 Georgia-Pacific enMotion® White High Capacity EPA Compliant Roll Towel

To load the first roll, follow steps 1-7
Steps to load first roll in the dispenser
  1. Place new roll in top bracket (make sure that the paper is fed over the top).
  2. Pull paper toward you and overlap the front support bar.
  3. Lift the transfer bar and tuck the paper behind it.
  4. Fold and crease a 1" flap at the end of the paper by folding it up (transfer bar teeth should rest in crease).
  5. With the transfer bar in place, press the advance button on the lower right of the machine.
  6. Once the paper feeds through the bottom, tear off the sheet and discard.
  7. Close the cover.
To load new rolls, follow steps 8-11
Steps to load new roll in the dispenser
  1. When the roll is the same size as the width of the support (4" or less), you are ready to add a new roll.
  2. Pull the carousel lock bar toward you and rotate the carousel down 180° until it locks. The partial roll should now be on the bottom (rewind any excess back onto the roll).
  3. Follow steps 1 through 4 to load a new roll in the top bracket (the transfer bar will be in a raised position and will activate/feed the new roll once the old roll is empty).
  4. Close the cover.

If you experience any problems with loading the dispenser, call 1-866-HELLO GP (435-5647) or contact us via e-mail.

enMotion® dispensers are offered via a lease agreement through an authorized distributor.