Georgia-Pacific | Professional

enMotion® Automated Towel Dispenser

ADJUSTING DISPENSER SETTINGS

Setting Controls

The enMotion® dispenser's adjustable settings are located inside the dispenser on the lower right side.

  1. The enMotion Dispenser's "Adjustable Sheet Length" (ASL) system allows for adjustments in towel length. The ASL system is located inside the cabinet on the lower right side.


  2. The sheet lengths are:

    • "S" Short towel (maximum number of hand dries) - approximately 8"
    • "M" Medium towel (optimal hand dry capacity) - approximately 12"
    • "L" Long towel (largest available towel) - approximately 16"
    Note: Set ASL to meet your needs.
  3. The enMotion Dispenser's "Adjustable Time Delay" (ATD) System allows towels to dispense at different time intervals after towel is removed from dispenser.Settings are:
    • "S" Short Delay
    • "M" Medium Delay
    • "L" Long Delay
    Note: The ATD System is preset at the "S" option. To change, locate ATD System inside cabinet on lower right side. Set ATD to meet your needs.
  4. The enMotion Dispenser's "Adjustable Sensor Range" (ASR) system allows for adjustment in sensor range to provide dependable dispensing of your towel. Settings are:
    • "S" Short Range
    • "M" Medium Range
    • "L" Long Range
    Note: The ASR system is pre-set at the "M" option. To change setting, locate the ASR system inside the cabinet on the lower right side. Set ASR to meet your needs.
  5. The "Dispense Mode" (DM) system allows for adjustment in how the towel is presented to the end user. Settings are:
    • "On Demand" (The towel will feed from the dispenser after the end user has activated the sensor.)
    • "Hanging Towel" (The towel will always be showing. After tearing off a towel, another towel will present itself.)
    Note: The DM system is pre-set at the "On Demand" option. Set DM to meet your needs.

enMotion® dispensers are offered via a lease agreement through an authorized distributor.